The BD-60 is Bulldog Boats entry size vessel of the virtually indestructible HDPE Bulldog range of boats. Fitted with a extra wide 2 person centre console (designed to clients requirements) with the helm on the stb side it allows for 2 seats next to the helm and a further 2 seats positioned behind.

The Hull is fully certified by MECAL ready for outfit to comply with UK and EU CE requirements. The BD-60 is a versatile multi-purpose boat designed to operate for extended periods without the need for maintenance. This boat is also idea as an RYA training boat thanks to its strength, durability and forgiveness.

The High-Density Polyethylene (HDPE) construction material provides tremendous strength and the PE Balls within the hull provide 90% permanent intact buoyancy. The result is an almost indestructible boat ideal for working in harsh marine environments.

Technical Requirements Dimensions –

The vessel is to have the following dimensions:

Length overall: 6.0m Beam Overall: 2.35m Draft: 0.4m Hull Construction – ISO12215 NSCV C3 requirements fully approved:

The vessel hull design uses a proven deep ‘V’ design with a 19⁰ dead rise. Hull filled with 75mm PE hollow balls providing 90% permanent intact buoyancy.

Deck & Bulwarks Key Features: Non-slip Deck. Exclusive to Bulldog HDPE Durbar Sheet, the deck will also be free draining.

Removable Splash well inner transom to enable full open deck Mooring points fitted with ring fairleads holes for mooring lines

Forward Anchor Locker – Anchor chain and rope to be housed within a HDPE locker.

Centre Console – 2-Person extra wide centre console with Makrolon Screen will be constructed from HDPE. The console can be sited forward or Aft on the deck to provide the maximum deck space for further seating.

Helm Console –Locker for Storage and emergency batteries.

Seating – (4) Shark Suspension seats

Propulsion Certified for up to 400hp (2 x 200hp outboards). Fuel capacity will be a twin 120 litre tanks.

The Company normally acts as broker for the vendors who unless otherwise stated is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is not guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and at his own expense to employ a qualified marine surveyor to carry out a survey and / or to have an engine trial conducted by us shall not imply any liability on our part.